|
TERMINOLOGY
CHART FOR THE DIY CANOPY KITS
|
|
DIY
|
Do It Yourself -
Everything is included except for the pipe which you can
purchase at any local Home Center (Lowes, Home Depot,
etc.). We even include a Pipe
Cut List.
|
|
VALANCED
|
This is a Tarp
Style, the tarp drops down over and down the wall aprox.
9 inches. around the perimeter of the Canopy.
|
|
NON-VALANCED
|
This a Tarp Style,
the tarp comes up just to the inside of the perimeter of
the Canopy Frame.
|
|
DEGREES
|
This is the Peak
Angle in Degrees for a Gable Roof, the angle is taken
where the legs meet the roof.
|
PEAK
ANGLE
(Low, Medium & High Peak)
|
This is the Peak
Angle for a Gable Roof:
Low Peak = 102 Degrees
Medium Peak = 110 Degrees
High Peak = 120 Degrees
|
FITTING
SIZE
(1", 1 3/8" & 1 5/8")
|
This is the size of
the fittings and the pipe you will need to purchase:
1" = 1" EMT Electrical Conduit
1 3/8" = 1 3/8" Toprail (Chain Link Pipe)
1 5/8" = 1 5/8" Toprail (Chain Link Pipe)
|
|
SIDEWALL
|
The sidewalls run
the length of the Canopy, the height of the sidewalls
are 6' 8".
|
|
ENDWALL
|
The endwalls run the
width of the Canopy, they follow the Gable in the
roof. There side height is 6' 8" and the
center height varies on different sizes.
|
|
FOOT
PADS
|
The Foot Pads are an
optional accessory, they attach
to the bottom of the legs with a thumb screw and have
pre-drilled holes in the base so they can be bolted down
to wood or cement.
|
|
CUT
CHART
|
The Cut
Chart is a list of
pipes needed by length and quantity.
|